Starter Kickback.
Seasoned HDF Member
Joined: Dec 2010
Posts: 7,736
Likes: 1,524
From: Coromandel Peninsula New Zealand
Thread Starter
|
Road Warrior
Joined: Aug 2007
Posts: 1,556
Likes: 65
From: Oakdale Ca.
So due to the "kicking back issue" my starter gear worked itself off inside my primary. Took the primary back off teeth are fine on the starter gear abd the clutch basket so any tricks to keep this damn thing on besides the washer that goes into the grove and crimps onto the bolt. Anybody ever use locktight.
Seasoned HDF Member
Joined: Dec 2010
Posts: 7,736
Likes: 1,524
From: Coromandel Peninsula New Zealand
So due to the "kicking back issue" my starter gear worked itself off inside my primary. Took the primary back off teeth are fine on the starter gear abd the clutch basket so any tricks to keep this damn thing on besides the washer that goes into the grove and crimps onto the bolt. Anybody ever use locktight.
Never used Loctite and never had issues with them coming undone except when comp is too high.
Thread
Thread Starter
Forum
Replies
Last Post