Unlock security system
I need some help. I have a 2008 Softtail deluxe and have the fob and am unable to remember how to unlock my security system. Can't find my owners manual (as usual). I set the code when I purchased my bike. The battery went dead. I unhooked it, charged it, hooked back up but cannot start. Lights flashing. Can anyone tell me the sequence to unlock again?
Tks J
after you do that, to recover/change your code, follow this procedure:
ignition: turn on, off, on, off, on
left turn signal: press 3 times
right turn signal: press 1 time
at this time, your present code will be flashing in the odometer, to change it, you cycle the digit with the left turn signal, and enter with the right. after you change all 5 numbers, you're done.
again, you have to have the fob with you and working to do this. now if you have an idea what your code is and want to give it a shot, try this:
ignition: on
turn signals: press both at the same time until you have dashes flashing in the odometer (only takes a couple of secs)
left turn signal: cycles through the digits
right turn signal: enters the selected digit, and moves to the next number
if you did it right, it'll work. if the lights just start flashing, you did it wrong, or you remembered the number wrong.
either way, i would get a new battery for the fob, and then change your code to something that you will remember. and it doesn't hurt to practice the override procedure every now and again so that if you lose your fob on the road, you aren't stuck in bfe.
Last edited by airforceacop; Mar 12, 2011 at 07:31 PM. Reason: cause I got bad grammer!
IT SAID TO KEEP THE BOOK in a SAFE PLACE......... maybe that was for a reason....
but like i said, if you have a working fob, it is a simple process to retrieve your code, and change it to something you can remember......
Trending Topics
The Best of Harley-Davidson for Lifelong Riders








