Anyone have Power Vision maps for Softail?
Thread Starter
|
Stage III
Joined: Jul 2010
Posts: 3
Likes: 0
Anyone have Power Vision maps for Softail?
Hey all,
I threw a Power Vision onto my 2006 Heritage Standard with a 95 kit, Thunderheader 2 into 1, and a K&N filter only to find out that because the power vision is so new and my bike is an 06 they don't have any PV maps already made for it yet. So I've been goin back and forth with them running a couple trial maps but I was wondering if anyone has any maps already made that would work so I can stop going back and forth with the Dynojet guys.
Thanks
I threw a Power Vision onto my 2006 Heritage Standard with a 95 kit, Thunderheader 2 into 1, and a K&N filter only to find out that because the power vision is so new and my bike is an 06 they don't have any PV maps already made for it yet. So I've been goin back and forth with them running a couple trial maps but I was wondering if anyone has any maps already made that would work so I can stop going back and forth with the Dynojet guys.
Thanks
Stellar HDF Member
Joined: Nov 2004
Posts: 3,156
Likes: 41
From: So Cal
Jamie at Fuel Moto has a MAP library much larger than Dynojet, if you bought from them just contact them and they will square you away. If you did not you may try calling them and see if you can purchase abase Map then read up on data logging and custom tune your bike with the data that you log. That one of the best things about the PV is the ability to self tune
I think I read it's also possible to convert a PC V map to a PV as a base map
I think I read it's also possible to convert a PC V map to a PV as a base map
Last edited by XARAN; Jul 22, 2012 at 10:20 PM.
Intermediate
Joined: Apr 2015
Posts: 45
Likes: 0
From: Alaska, God's Country
any 2006 Softail maps yet for 95"?
Hey did you guys ever get good maps built/found for the 2006 Softail?
I've got one right now that I just did a 95" kit on and need a good PV map for it.
I've dealt with Fuel Moto for PV maps in the past on all the bikes I've tuned, but Jamie doesn't have any real decent maps developed yet for the 06's (still).
He sent me a base map to get me going but it runs worse than the original 88" map did really. Loaded up heavy on fuel and blowing black smoke when you get on it hard.
If anyone has a good map for 95" Softails I'd sure appreciate some direction here.
It's got a mild street/torque port job (stock diameter valves) from "Dewy's" AKA Street-Performance in Washington, Andrews TW-57H Cams, and SE Flat-Top Pistons, and V&V Long-Shots.
Help a biker out?
Thx
I've got one right now that I just did a 95" kit on and need a good PV map for it.
I've dealt with Fuel Moto for PV maps in the past on all the bikes I've tuned, but Jamie doesn't have any real decent maps developed yet for the 06's (still).
He sent me a base map to get me going but it runs worse than the original 88" map did really. Loaded up heavy on fuel and blowing black smoke when you get on it hard.
If anyone has a good map for 95" Softails I'd sure appreciate some direction here.
It's got a mild street/torque port job (stock diameter valves) from "Dewy's" AKA Street-Performance in Washington, Andrews TW-57H Cams, and SE Flat-Top Pistons, and V&V Long-Shots.
Help a biker out?
Thx
Seasoned HDF Member
Joined: Sep 2008
Posts: 14,188
Likes: 11,299
From: San Diego, CA
I bought my PowerVision from FuelMoto for my '12 Bagger, and got an extra license for my '03 Heritage.
My '03 Heritage has the HD big bore kit (95ci); with the big bore kit pistons/jugs, SE203 cams, SE Air cleaner, and Vance & Hines big shot exhausts.
I ran it for several years with the HD download. It ran OK, but nothing special.
Jaime told me then, that he doesn't have a lot of maps for the pre-O2 sensor twin cams. He directed me to a tech at DynoJet. Sorry I forgot his name, the guy did a great job.
The DynoJet tech took my HD map, tweaked it, and it felt like a different bike when I flashed the new tune..... they made me a very good map.
Your mods are different than mine, but if you want to take a look at my MAP, send me a pm with your email. I'll send it to you. (catch me before tomorrow afternoon, I'm leaving for a one week vacation)
In any case, keep working with the DynoJet guys... they came through for me...
Good luck...
NOTE: I DIDN'T REALIZE THIS WAS A 3 YEAR OLD THREAD!!
.
My '03 Heritage has the HD big bore kit (95ci); with the big bore kit pistons/jugs, SE203 cams, SE Air cleaner, and Vance & Hines big shot exhausts.
I ran it for several years with the HD download. It ran OK, but nothing special.
Jaime told me then, that he doesn't have a lot of maps for the pre-O2 sensor twin cams. He directed me to a tech at DynoJet. Sorry I forgot his name, the guy did a great job.
The DynoJet tech took my HD map, tweaked it, and it felt like a different bike when I flashed the new tune..... they made me a very good map.
Your mods are different than mine, but if you want to take a look at my MAP, send me a pm with your email. I'll send it to you. (catch me before tomorrow afternoon, I'm leaving for a one week vacation)
In any case, keep working with the DynoJet guys... they came through for me...
Good luck...
NOTE: I DIDN'T REALIZE THIS WAS A 3 YEAR OLD THREAD!!
.
Last edited by hattitude; Aug 19, 2015 at 06:55 PM.
Cruiser
Joined: Aug 2010
Posts: 116
Likes: 0
Auto Tune
Have you ran the Auto Tune function on any of the maps you already have?
If not Auto Tune the map you have. You will probably have to load, tune and flash the same tune several times to get the bike running good.
If not Auto Tune the map you have. You will probably have to load, tune and flash the same tune several times to get the bike running good.
Intermediate
Joined: Apr 2015
Posts: 45
Likes: 0
From: Alaska, God's Country
Well my reply was current, I'm just that hard up to find a good map for this thing.
I can't seem to PM you, must be cause I've got a low post count still here?
Anyway, if you'd like to share the map you've got I'd love to compare it to what I've got and maybe see where I could make useful changes.
My email is: andy1echo@msn.com
Thanks!
I can't seem to PM you, must be cause I've got a low post count still here?
Anyway, if you'd like to share the map you've got I'd love to compare it to what I've got and maybe see where I could make useful changes.
My email is: andy1echo@msn.com
Thanks!
I bought my PowerVision from FuelMoto for my '12 Bagger, and got an extra license for my '03 Heritage.
My '03 Heritage has the HD big bore kit (95ci); with the big bore kit pistons/jugs, SE203 cams, SE Air cleaner, and Vance & Hines big shot exhausts.
I ran it for several years with the HD download. It ran OK, but nothing special.
Jaime told me then, that he doesn't have a lot of maps for the pre-O2 sensor twin cams. He directed me to a tech at DynoJet. Sorry I forgot his name, the guy did a great job.
The DynoJet tech took my HD map, tweaked it, and it felt like a different bike when I flashed the new tune..... they made me a very good map.
Your mods are different than mine, but if you want to take a look at my MAP, send me a pm with your email. I'll send it to you. (catch me before tomorrow afternoon, I'm leaving for a one week vacation)
In any case, keep working with the DynoJet guys... they came through for me...
Good luck...
NOTE: I DIDN'T REALIZE THIS WAS A 3 YEAR OLD THREAD!!
.
My '03 Heritage has the HD big bore kit (95ci); with the big bore kit pistons/jugs, SE203 cams, SE Air cleaner, and Vance & Hines big shot exhausts.
I ran it for several years with the HD download. It ran OK, but nothing special.
Jaime told me then, that he doesn't have a lot of maps for the pre-O2 sensor twin cams. He directed me to a tech at DynoJet. Sorry I forgot his name, the guy did a great job.
The DynoJet tech took my HD map, tweaked it, and it felt like a different bike when I flashed the new tune..... they made me a very good map.
Your mods are different than mine, but if you want to take a look at my MAP, send me a pm with your email. I'll send it to you. (catch me before tomorrow afternoon, I'm leaving for a one week vacation)
In any case, keep working with the DynoJet guys... they came through for me...
Good luck...
NOTE: I DIDN'T REALIZE THIS WAS A 3 YEAR OLD THREAD!!
.
Trending Topics
Seasoned HDF Member
Joined: Sep 2008
Posts: 14,188
Likes: 11,299
From: San Diego, CA
Well my reply was current, I'm just that hard up to find a good map for this thing.
I can't seem to PM you, must be cause I've got a low post count still here?
Anyway, if you'd like to share the map you've got I'd love to compare it to what I've got and maybe see where I could make useful changes.
My email is: andy1echo@msn.com
Thanks!
I can't seem to PM you, must be cause I've got a low post count still here?
Anyway, if you'd like to share the map you've got I'd love to compare it to what I've got and maybe see where I could make useful changes.
My email is: andy1echo@msn.com
Thanks!
I'll send it to you later today....
Good luck
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
Thread
Thread Starter
Forum
Replies
Last Post
Cwboyscooby
Ignition/Tuner/ECM/Fuel Injection
3
Sep 12, 2012 11:28 AM
