When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Yeah, on the new bikes the curved parts of the air cleaner housing are open element - they show the air filter inside. That's an OEM air cleaner housing with an OEM filter inside it...with a sock over it...like we've said.
OP - get the Dynojet tuner from Fuel Moto and retune your bike.
I didn't realize that Harley was putting the open style air cleaners on the newer M8's. That's a nice improvement over the older Twin Cam Air Cleaners!
Drag specialties LED front marker/turn signal lights
2014 Breakout
Need some help guys! I just got a pair of drag specialties LED front marker/turn signals to do away with the bullet housings, the new LED's came with a black wire and a purple wire but no blue wire ( I believe from reading another forum that the blue wire is the marker light wire.) since the LED's only have two wires what do I do with the blue wire to make sure my marker lights work too?
Just wanted to ask you guys in the States that are running with no taillight, using the signal lights to do the running, brake and turn, do you
find them visible enough? I purchased a real nice license plate bracket that mounts at the rear of the fender but I will lose my taillight and will
just be using the turn signals for everything. Thanks.......
Just wanted to ask you guys in the States that are running with no taillight, using the signal lights to do the running, brake and turn, do you
find them visible enough? I purchased a real nice license plate bracket that mounts at the rear of the fender but I will lose my taillight and will
just be using the turn signals for everything. Thanks.......
Lots of folks swap out the H-D bulbs for LED's. They are much brighter.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
Feb 13, 2015, 01:41 PM
