Helmet buffeting...possible solution???
Thread Starter
|
Advanced
Joined: Apr 2007
Posts: 74
Likes: 0
From: Indiana
Helmet buffeting...possible solution???
I am 6'4" and when wearing a helmet on my 07 Ultra Classic (12" stock windshield) my head get buffetted by the wind. It's like I've got a vibrator attached to my helmet it's so bad.
I've been searching possible solutions from a taller windshield to this product mentioned elsewhere: Micro-Swirl Edging, http://www.saeng.com/4000.htm. I would like to know if anyone on the forum has used this product and if it does indeed do what is advertised: "With up to 5 inches of boost, a softer and dryer wake, V.3 Micro-Swirl edging provides a smoother, quieter and more comfortable environment."
Any comments or other possible solutions to my problem are appreciated.
--
Kevin
I've been searching possible solutions from a taller windshield to this product mentioned elsewhere: Micro-Swirl Edging, http://www.saeng.com/4000.htm. I would like to know if anyone on the forum has used this product and if it does indeed do what is advertised: "With up to 5 inches of boost, a softer and dryer wake, V.3 Micro-Swirl edging provides a smoother, quieter and more comfortable environment."
Any comments or other possible solutions to my problem are appreciated.
--
Kevin
Road Master
Joined: Mar 2007
Posts: 973
Likes: 0
From: Mt Dora Florida
RE: Helmet buffeting...possible solution???
I had the same problem but I'm much shorter.
First take your left hand while cruising at highway speed and see where the turbulace is coming from. I found a lot coming over the top of the tank. Harley has a fork air dam for $20 that will eliminate that source. Also got rid af a lot of mist to the face in the rain.
First take your left hand while cruising at highway speed and see where the turbulace is coming from. I found a lot coming over the top of the tank. Harley has a fork air dam for $20 that will eliminate that source. Also got rid af a lot of mist to the face in the rain.
Cruiser
Joined: Apr 2007
Posts: 135
Likes: 0
From:
RE: Helmet buffeting...possible solution???
I am 6'3" tall and I havea '07 Electra Glide Classic. I had the exact same problem. It vibrated so bad withmy helmet I couldn't even read street signs.
Hard to believe but I cut my windshield and it solved the problem. I took off about two and a half inches and now it is perfect. I did not want to get a taller winshield because it is a pain in the butt looking through them especially in the rain and at night.
Something about the curved design of the stock windshied causes alot of buffeting on taller riders. I cut mine staright off at the top so it is not curved, I actually get better protection from the wind and no buffeting.
Hard to believe but I cut my windshield and it solved the problem. I took off about two and a half inches and now it is perfect. I did not want to get a taller winshield because it is a pain in the butt looking through them especially in the rain and at night.
Something about the curved design of the stock windshied causes alot of buffeting on taller riders. I cut mine staright off at the top so it is not curved, I actually get better protection from the wind and no buffeting.
Intermediate
Joined: Apr 2007
Posts: 31
Likes: 0
From:
RE: Helmet buffeting...possible solution???
I used a dremel tool to cut down the windshield on my Road King but you can also use a jig saw with a fine tooth blade. There's a thread on this forum in the DIY section with step by step instructions on how to cut down your windshield. It's entitled"Cutting A Windshield".
Outstanding HDF Member
Joined: Oct 2006
Posts: 2,340
Likes: 2
From: Omaha Nebraska
RE: Helmet buffeting...possible solution???
ORIGINAL: stangmans02deuce
so what is the part number on that fork air dam???
and what did u cut the windshield with???
thanks
don b
so what is the part number on that fork air dam???
and what did u cut the windshield with???
thanks
don b
http://www.harley-davidson.com/gma/g...bmLocale=en_US
Road Master
Joined: Dec 2006
Posts: 975
Likes: 0
From: Michigan
RE: Helmet buffeting...possible solution???
pics of this straight cut windshield avalible? i am 6'4 and have the save issue on interstate travel. almost where my helmet starts dancing back off my forehead and sliding back. Making it tighter doesnt help-just makes it hurt on throat. it starts at about 60mph
When i put a TALL - vented shield (that i bought from someone here) it helps but I dont like looking thru the shield either. I only use that for LONG planned travel. Otherwise , prefer shorter for daily riding
When i put a TALL - vented shield (that i bought from someone here) it helps but I dont like looking thru the shield either. I only use that for LONG planned travel. Otherwise , prefer shorter for daily riding
Trending Topics
Road Captain
Joined: Nov 2005
Posts: 720
Likes: 6
RE: Helmet buffeting...possible solution???
http://www.jacksflaps.com/
It REALLY does work well. I have one and swear by it. Helmet stays put where it belongs with no turbulance.
It REALLY does work well. I have one and swear by it. Helmet stays put where it belongs with no turbulance.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Outstanding HDF Member
Joined: Jun 2007
Posts: 2,542
Likes: 2
From: Cocoa Beach, Florida
RE: Helmet buffeting...possible solution???
Wow. That's an odd looking little gizmo...
Anyone know yet if it helps (or hurts)heat stuff with an'07 FLHR? It might actually help if it re-directs air flow down over the fins.
Anyone know yet if it helps (or hurts)heat stuff with an'07 FLHR? It might actually help if it re-directs air flow down over the fins.
Outstanding HDF Member
Joined: Sep 2006
Posts: 2,150
Likes: 0
From: Wichita, KS
RE: Helmet buffeting...possible solution???
ORIGINAL: peppi
http://www.jacksflaps.com/
It REALLY does work well. I have one and swear by it. Helmet stays put where it belongs with no turbulance.
http://www.jacksflaps.com/
It REALLY does work well. I have one and swear by it. Helmet stays put where it belongs with no turbulance.
