DYNO Numbers for Baggers???
Intermediate
Joined: Jul 2006
Posts: 30
Likes: 1
From: Central Illinois
03 RKC, SE slip-ons, SE Airbox, SERT installed. Dynotune numbers: HP is 69.71, torque is 76.79. I can't say I was impressed with the results of $300.00 worth of Dynotuning. According to my chart, I gained 4.18 in HP and 0.98 in torque over the baseline readings they got from the stock SERT map I was originally using...
Tourer
Joined: Aug 2007
Posts: 287
Likes: 1
From: N. Scottsdale, AZ
2004 FLTRI, stock engine run for baseline; 57.8 Max Power and 66.5 Max Torque.
Arlen Ness BS, Fullsac, Bub 7's, and SERT w/ a custom map by Trask Performance. Here are the numbers; 72.8 Max Power and 81.6 Max Torque. Nice improvement for a few add-on parts. Trask does all the Dyno runs for my bikes. Excellent people, and service. Very pleased.
Arlen Ness BS, Fullsac, Bub 7's, and SERT w/ a custom map by Trask Performance. Here are the numbers; 72.8 Max Power and 81.6 Max Torque. Nice improvement for a few add-on parts. Trask does all the Dyno runs for my bikes. Excellent people, and service. Very pleased.
Tourer
Joined: Aug 2007
Posts: 287
Likes: 1
From: N. Scottsdale, AZ
tune
03 RKC, SE slip-ons, SE Airbox, SERT installed. Dynotune numbers: HP is 69.71, torque is 76.79. I can't say I was impressed with the results of $300.00 worth of Dynotuning. According to my chart, I gained 4.18 in HP and 0.98 in torque over the baseline readings they got from the stock SERT map I was originally using...
Ultimate HDF Member
Joined: Mar 2008
Posts: 5,040
Likes: 3
From: Nice home on the NorCal Coast
First pass everything set to Neutral:
68.29 HP
86.95 ft/lbs torque
20 passes over 4 days later:
82.53 HP
95.07 ft/lbs torque
Gains:
14.24 HP
8.12 ft/lbs torque
I could have set it for slightly higher HP or torque numbers but would have had to get it on the cams earlier than I wanted or off the cams earlier. The way it's set now, no monster motor but a good, economical build with power and torque through out the rpm range and it cost me less than half of what a standard B.B. build costs.
Find yourself a tuner who will take the time and trouble to find the "sweet blend" for your combination and you'll be surprised what you'll gain.
68.29 HP
86.95 ft/lbs torque
20 passes over 4 days later:
82.53 HP
95.07 ft/lbs torque
Gains:
14.24 HP
8.12 ft/lbs torque
I could have set it for slightly higher HP or torque numbers but would have had to get it on the cams earlier than I wanted or off the cams earlier. The way it's set now, no monster motor but a good, economical build with power and torque through out the rpm range and it cost me less than half of what a standard B.B. build costs.
Find yourself a tuner who will take the time and trouble to find the "sweet blend" for your combination and you'll be surprised what you'll gain.
Last edited by krusr; Oct 6, 2008 at 06:08 PM.
Banned
Joined: Feb 2008
Posts: 1,943
Likes: 0
From: Chicago.
Back to insults again Den old buddy? LOL
Yep, and I know all about your so called "Custom Build". LOL
At 6' 5" and 300lbs, I don't think I want to lose 150lbs, I do have a gut though so maybe 40lbs.
Anyway, your story, tell it the way you want, I could care less but it does prove two things:
First, I know more about wrenching than you want to give me credit for although I'm no expert,
Secondly, you just proved my signature perfectly:
Yep, and I know all about your so called "Custom Build". LOL
At 6' 5" and 300lbs, I don't think I want to lose 150lbs, I do have a gut though so maybe 40lbs.
Anyway, your story, tell it the way you want, I could care less but it does prove two things:
First, I know more about wrenching than you want to give me credit for although I'm no expert,
Secondly, you just proved my signature perfectly:
Was pointing out simple physics
Torque = the ability to overcome Inertia
Inertia = The natural state of an object whether it be in motion or at rest.
Don't take things so personal. You sound paranoid, I don't care what you weigh dude.
And as far as wrenching goes.... I do ALL my own work.. Presently doing a frame up rebuild on my old Dyna.
We can put an end to this nonsense anytime you wish. You see, I am neither your friend or your enemy. Like always, it's your call.
Have a Bla Bla Bla...day
Last edited by Roadjunkie1; Aug 16, 2008 at 08:43 PM. Reason: Thank you Krusr for your approval. BTW, George says..who?
Ultimate HDF Member
Joined: Mar 2008
Posts: 5,040
Likes: 3
From: Nice home on the NorCal Coast
Who said I was talking to you?
Was pointing out simple physics
Torque = the ability to overcome Inertia
Inertia = The natural state of an object whether it be in motion or at rest.
Don't take things so personal. You sound paranoid, I don't care what you weigh dude.
And as far as wrenching goes.... I do ALL my own work.. Presently doing a frame up rebuild on my old Dyna.
We can put an end to this nonsense anytime you wish. You see, I am neither your friend or your enemy. Like always, it's your call.
Have a Bla Bla Bla...day
Was pointing out simple physics
Torque = the ability to overcome Inertia
Inertia = The natural state of an object whether it be in motion or at rest.
Don't take things so personal. You sound paranoid, I don't care what you weigh dude.
And as far as wrenching goes.... I do ALL my own work.. Presently doing a frame up rebuild on my old Dyna.
We can put an end to this nonsense anytime you wish. You see, I am neither your friend or your enemy. Like always, it's your call.
Have a Bla Bla Bla...day
You did copy, and then subsequently modified my signature which I've been using for months didn't you? And although playing the innocent party, you've refered to me as being fat and overweight numerous times along with making several comments about my lack of mechanical skills.
And that's just on this board.
I won't even go into that verbal tirade you threw at me a week or so ago.
BTW, Torque is the intent of a force to produce rotation about an axis.
As mentioned, You can end this nonsense anytime you want and no, it's your call and has been ever since I made the mistake of standing up for you when you were down and hurt.
So as you're so fond of saying... "Have a blah, blah, day.
Ball's in your court neither friend nor enemy.
Last edited by krusr; Aug 16, 2008 at 10:09 PM.
Banned
Joined: May 2007
Posts: 30
Likes: 0
From:
2008 FLHTCU V&H True Duals/Rush Slip-ons PCIII
Can't find my dyno sheet (I'll post it if I do), but the run done at Sabine Performance in Dallas for my 2008 Ultra are 70.7 HP and 84.2 torque at 3K. That's with Vance & Hines True Dual headers, Rush slip-ons and a Power commander 3 with HD standard ECU download. Plus SE stage 1 air cleaner and back plate. Actually I should have specified the info listed with a SERT ECM download for the proper PCIII download. I didn't know until later that the bike had a SERT download previously installed. The bike did loose the decel pops after the PC work. And it runs good. But it won't keep up with a 110 or even a 103. So, cams, big bore, or both?
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Banned
Joined: Feb 2008
Posts: 1,943
Likes: 0
From: Chicago.
Funny, you're the one sounding paranoid.
You did copy, and then subsequently modified my signature which I've been using for months didn't you? And although playing the innocent party, you've refered to me as being fat and overweight numerous times along with making several comments about my lack of mechanical skills.
And that's just on this board.
I won't even go into that verbal tirade you threw at me a week or so ago.
BTW, Torque is the intent of a force to produce rotation about an axis.
As mentioned, You can end this nonsense anytime you want and no, it's your call and has been ever since I made the mistake of standing up for you when you were down and hurt.
So as you're so fond of saying... "Have a blah, blah, day.
Ball's in your court neither friend nor enemy.
You did copy, and then subsequently modified my signature which I've been using for months didn't you? And although playing the innocent party, you've refered to me as being fat and overweight numerous times along with making several comments about my lack of mechanical skills.
And that's just on this board.
I won't even go into that verbal tirade you threw at me a week or so ago.
BTW, Torque is the intent of a force to produce rotation about an axis.
As mentioned, You can end this nonsense anytime you want and no, it's your call and has been ever since I made the mistake of standing up for you when you were down and hurt.
So as you're so fond of saying... "Have a blah, blah, day.
Ball's in your court neither friend nor enemy.
My definition of torque is in relation to linear montion, and unless you do all your riding on a Dyno, was the point of relevance. But then again, any Califorina resident with an 2000 year bike and only 50,000 miles doesn't ride much anyway Mr Paraniod Google boy. Put the down the bottle and your two packs of smokes and go to a meeting dude. You're making a HUGE fool of yourself.
Before you respond with another " Verbal Traide", I wish to add, My Life, My Home, My Family and My Financial matters are none of your damn business. You could only hope to be as happy as me some day.
I suggest you stop stalking other men on the internet, it's just plain weird.
Get your last word in. I wash my hands of you (until you show up again)
My wife is going riding with her lazy a$$ husband. Heck, might even get her to buy breakfast too. (snicker snicker)
I feel sorry for you bro, I trully do. I know that are a good guy at heart, you should try to see the good in others.
Last edited by Roadjunkie1; Aug 17, 2008 at 05:26 AM.
Ultimate HDF Member
Joined: Mar 2008
Posts: 5,040
Likes: 3
From: Nice home on the NorCal Coast
My definition of torque is in relation to linear montion, and unless you do all your riding on a Dyno, was the point of relevance. But then again, any Califorina resident with an 2000 year bike and only 50,000 miles doesn't ride much anyway Mr Paraniod Google boy. Put the down the bottle and your two packs of smokes and go to a meeting dude. You're making a HUGE fool of yourself.
Before you respond with another " Verbal Traide", I wish to add, My Life, My Home, My Family and My Financial matters are none of your damn business. You could only hope to be as happy as me some day.
I suggest you stop stalking other men on the internet, it's just plain weird.
Get your last word in. I wash my hands of you (until you show up again)
My wife is going riding with her lazy a$$ husband. Heck, might even get her to buy breakfast too. (snicker snicker)
I feel sorry for you bro, I trully do. I know that are a good guy at heart, you should try to see the good in others.
Before you respond with another " Verbal Traide", I wish to add, My Life, My Home, My Family and My Financial matters are none of your damn business. You could only hope to be as happy as me some day.
I suggest you stop stalking other men on the internet, it's just plain weird.
Get your last word in. I wash my hands of you (until you show up again)
My wife is going riding with her lazy a$$ husband. Heck, might even get her to buy breakfast too. (snicker snicker)
I feel sorry for you bro, I trully do. I know that are a good guy at heart, you should try to see the good in others.
I pray I never become as happy as you.
Your continual keyboard commando tactics have grown predictable and meaningless to me but the constant derogatory attacks, the insulting and demeaning comments, along with the condescending mannerisms in your wording which you enjoy spewing towards myself and others speak volumes towards the character of man you truly are as well as the type of man you wish to be but never will.
For one who claims to be the victim and completely innocent, it appears you've written quite a few insulting and derogatory comments towards me in just the above post alone.
Coincidence or are you trolling, trying to bait me into another verbal spar?
Maybe get both, not just yourself banned this time? I won't play this sick game you insist on playing.
As for me today, Im hooking up with Stroker, Placerville Dyna, GlideRider, WindRider and a couple more Losers that know you and I'm sure we'll have some good laughs. In a couple of weeks Ill be in Yreka with about 30 or so more Losers and Im sure youll be spoken of fondly.
Be safe and enjoy your ride with your wife and the Chrome kittens.
Once again, your words, not mine have proven who the stalker is and what your foolish and infantile motives truly are.
Krusr
Last edited by krusr; Sep 9, 2008 at 03:43 PM.