anyone add driving lights?
Thread Starter
|
Road Captain
Joined: Jul 2008
Posts: 512
Likes: 2
From: Marlton NJ
anyone add driving lights?
Has anyone added driving lights to their scoot, and if so can I hook them up to the
acc switch? Is that switch protected by a fuse already? If I hook up to it do I need to use a relay or can I wire them directly to the switch? These are the light I am using
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
acc switch? Is that switch protected by a fuse already? If I hook up to it do I need to use a relay or can I wire them directly to the switch? These are the light I am using
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
Seasoned HDF Member
Joined: Dec 2007
Posts: 8,341
Likes: 714
the switch is relayed to a plugg under the seat it is fused. the plugg uses duetch conecters . in the plugg there are 4 holes one is a nutreal one is hot on the acc switch one it on the ignition switch one is hot use a tester to figure out witch one is witch. the duetch connectors are avaliable at the dealer really inexpesive SUPRISE they crimp to your wires and plugg into socket under seat the socket has a rubber plugg on cover it should be right on top or just in front of battery.
Road Master
Joined: May 2007
Posts: 938
Likes: 0
From: North Central Arkansas
I bought Motolights, expensive but maybe the best out there. The kit they sent me was designed for my '07 Ultra and wired easily to the acc switch and operate independently from the other lights on the bike as a result. You can't go wrong using the acc switch if you wire the rest of it correctly.
EGK
EGK
Road Warrior
Joined: Feb 2008
Posts: 1,484
Likes: 2
From: Sarasota, Florida
Trending Topics
Extreme HDF Member
Joined: Apr 2006
Posts: 10,449
Likes: 46
From: Roswell, GA
If your light kit doesn't come with the Deutsch connector (as the Motolights does), you can buy the HD "Supplemental 12V Power Point," part no. 91843-97, that has the correct connector at one end and a cigarette lighter outlet at the other end. Simply cut-off the cigarette lighter and splice in your aux. light wiring. Or, have the parts guy do a print-out of the accessory Power Point and buy the connector, lock, and sockets to assemble your own--I did this for a cost of $6, but didn't save the part nos. The Deutsch connector accepts 4 wires, but you will only need chambers 1-ground and 4-power--they're numbered.
Good luck with your project.
Good luck with your project.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Thread
Thread Starter
Forum
Replies
Last Post
