Lopey Cam
Stock performance at low rpms is one thing, losing low rpm performance due to the wrong cam is another. I know from my early days in hot rodding the easiest way to make a fast car slow is to put in too much cam.
Road Captain
Joined: Jun 2007
Posts: 716
Likes: 24
Alot of the SE-211 "lack of bottom end" theory is well justified in the 88 CID Twin Cam era. I have installed his cam on modern 96" + TC's, with the Delphi FI and the increased swept compression that the larger displacement provides, and it is a great performance cam. It's not an SE-255 bottom end cam by any means, but it is way more fun to ride than a 255.
My $.02
My $.02
Road Master
Joined: May 2009
Posts: 1,231
Likes: 5
From: In the north
I have Andrews 26 in my 05 88TC along with stage one intake and the older stage one slip ons and the SE pro Tuner. How would any of these compair to my setup as far as idle note and performance?
Alot of the SE-211 "lack of bottom end" theory is well justified in the 88 CID Twin Cam era. I have installed his cam on modern 96" + TC's, with the Delphi FI and the increased swept compression that the larger displacement provides, and it is a great performance cam. It's not an SE-255 bottom end cam by any means, but it is way more fun to ride than a 255.
My $.02
My $.02
Idle note, the only one of the four with a pronounced lope is the 204.
Thread
Thread Starter
Forum
Replies
Last Post
I8SMK4U
Touring Models
14
Oct 2, 2013 01:42 PM
