Accessory Port Schematic
Thread Starter
|
Cruiser
Joined: Mar 2011
Posts: 120
Likes: 0
Accessory Port Schematic
Hey folks.. I hate to repeat a post, but I have searched high and low for diagram and I cannot locate.
Does anyone know what what wires are what in the accessory connector under the seat in front of the battery?
Thanks!
Whiskers
Does anyone know what what wires are what in the accessory connector under the seat in front of the battery?
Thanks!
Whiskers
Road Captain
Joined: Aug 2010
Posts: 511
Likes: 14
Not to hijack the thread, the one I know about is a grey connector with one wire right by the battery. I have heard of others talking about a black connector with multiple wires. Are there two in this area or is it different models or years?
Extreme HDF Member
Joined: Apr 2006
Posts: 10,449
Likes: 46
From: Roswell, GA
The chambers are numbered with small, embossed numbers on the connector: 1= run light circuit, always "on" ; 2= brake light circuit closed by brake lever or pedal; 3= switched circuit controlled by ACC switch on fairing cap of EG/SG/RG or nacelle on RK's; and, 4= ground. 1,2, and 3 require the ignition switch be "on" or in "accessory."
Carl
Carl
Last edited by Harleypingman; Apr 5, 2011 at 01:03 PM.
Stellar HDF Member
Joined: Jul 2009
Posts: 2,011
Likes: 143
From: Albuquerque New Mexico
The chambers are numbered with small, embossed numbers on the connector: 1= run/energized with the ignition switch "on" or in accessory position; 2= brake/energized by brake lever or pedal; 3= switched circuit controlled by ACC switch on fairing cap of EG/SG/RG or nacelle on RK's; and, 4= ground.
Carl
Carl
Thread
Thread Starter
Forum
Replies
Last Post
