Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

Street Glide Headlight Problem

Thread Tools
 
Search this Thread
 
Old May 21, 2011 | 06:11 PM
  #1  
StreetCopFLHX08's Avatar
StreetCopFLHX08
Thread Starter
|
6th Gear
Joined: May 2011
Posts: 10
Likes: 0
From: Gulfport, MS
Default Street Glide Headlight Problem

I have a 2008 Street Glide that only has highbeam headlight. Bulb is still good but when I switch it to low beam, I have no light. Any help would be greatly appreciated. Thanks.
 
Reply
Old May 21, 2011 | 06:15 PM
  #2  
dawg's Avatar
dawg
Seasoned HDF Member
Shutterbug
Liked
Loved
Community Favorite
Joined: Jun 2006
Posts: 28,424
Likes: 3,948
From: Vermont
Default

You sure the bulb is still good? If your low beam is out, your bulb is probably no good.
 
Reply
Old May 21, 2011 | 06:22 PM
  #3  
bigdady's Avatar
bigdady
Tourer
Joined: Jun 2009
Posts: 257
Likes: 1
From: Bayarea California
Default

check the low beam wire where it connects to the connector on the back of the lamp. i had that problem on my wifes sporty
 
Reply
Old May 21, 2011 | 08:28 PM
  #4  
hdmg's Avatar
hdmg
Cruiser
Joined: Oct 2009
Posts: 109
Likes: 0
Default

I have an 09 streetglide and my low beam filament never lasts more than about 3 or 4 months.
From stock harley to expensive PIAA bulbs, I have the same problem.
 
Reply
Old May 21, 2011 | 10:02 PM
  #5  
StreetCopFLHX08's Avatar
StreetCopFLHX08
Thread Starter
|
6th Gear
Joined: May 2011
Posts: 10
Likes: 0
From: Gulfport, MS
Default

Thanks Guys. I will look into it. Will get back with you.
 
Reply
Old May 22, 2011 | 08:11 AM
  #6  
soos's Avatar
soos
Grand HDF Member
Joined: Sep 2005
Posts: 4,890
Likes: 73
From: MA
Default

Your low beam filament is the one that sits forward in the "spoon". A break can be very hard to detect.
 
Reply
Old Jun 2, 2011 | 05:06 AM
  #7  
StreetCopFLHX08's Avatar
StreetCopFLHX08
Thread Starter
|
6th Gear
Joined: May 2011
Posts: 10
Likes: 0
From: Gulfport, MS
Default

Yea, It must have been a loose wire. I took my fairing off the other night to install a radio and when I remounted it, the low beam started to work and has been ever since. Thanks for the advise.
 
Reply
Old Jun 2, 2011 | 06:49 AM
  #8  
HDV-GLIDE's Avatar
HDV-GLIDE
Elite HDF Member
Joined: Jul 2008
Posts: 4,741
Likes: 45
From: Indian Land, SC
Default

Replace that crap piece of plastic they call a headlight plug with a Bakelite plug from NAPA and that may solve the issue also.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MichiganDave
Touring Models
3
Jul 25, 2012 09:01 PM
FUQUA
Dyna Glide Models
6
Feb 8, 2010 06:45 PM
deadeye1340?
Ignition/Tuner/ECM/Fuel Injection
2
Feb 28, 2007 07:50 AM
Whiffleboy
Dyna Glide Models
4
Oct 16, 2006 01:06 PM
JBA111
Ignition/Tuner/ECM/Fuel Injection
0
Aug 19, 2006 01:48 PM




All times are GMT -5. The time now is 12:48 PM.