turn signal relocation
Road Master
Joined: Oct 2005
Posts: 1,034
Likes: 3
From:
RE: turn signal relocation
ORIGINAL: jamman
I took my time, about 1 1/2 on each mount, they are almost identical,
What i done was taped them up. with masking tape , made a cut out in the shape of the bullets with card board and transfered the image. Then I cut with a dremel tool to roughly the ....
I took my time, about 1 1/2 on each mount, they are almost identical,
What i done was taped them up. with masking tape , made a cut out in the shape of the bullets with card board and transfered the image. Then I cut with a dremel tool to roughly the ....
Intermediate
Joined: Jul 2006
Posts: 38
Likes: 0
From:
RE: turn signal relocation
I'm like the rest. DON'T use H-D relocation kit. I put on my '05 wideglide and they are rusting. Shame when you pay all that money for there parts and this happens. Tommy really liked yours may give it a try. Not right having to do it twice.
Thread
Thread Starter
Forum
Replies
Last Post
davidson, difficulty, dyna, forks, front, handlebars, harley, hole, installation, kit, plug, relocation, signal, signals, turn
