When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
I just got a 04 dyna superglide. The guy i got it from had took off the speedometer and added ape bars and a wide glide front end with a fat front tire. I am wanting to put a speedometer and the idiot light back on it. How the heck can i do this. I cant figure out how i even start. I dont like the stock look on a dyna with the speedometer on the bars. i would like to do a riser mount or something. any help will be apreciated. thanks!
Im not wanting to know how to relocate it. Im wondering how i install one . it doesnt have one at all and i want to add one with the warning lights.
The wiring stubs are probably there somewhere, maybe clipped and taped to the harness under the tank. Get a wiring diagram for your bike, which will have color codes for all the wires. Now just connect the proper wires together to your new instrument wiring. You might want to buy a used factory gauge set-up to assure proper wire colors, then mount the idiots and gauges where you see fit.
Im not wanting to know how to relocate it. Im wondering how i install one . it doesnt have one at all and i want to add one with the warning lights.
Originally Posted by butler742
...I dont like the stock look on a dyna with the speedometer on the bars. i would like to do a riser mount or something. any help will be apreciated. thanks!...
You're right: re-installing is the 2nd step in the relocation process. Just tryed to help you.....
The first thing I would do as HemiOrange has suggested is to see about the wiring harness. Most likely the speedo and idiot lights were just disconnected and the wires and harness are tucked up in the frame probably under the gas tank. If they are there you are more than half way home. You have a few options as far as speedo and idiot lights go. You can go with an analog or digital gauges. They have mounts for the handlebars, the fork tubes hell they even have mirrors with the speedo built into them. As far as idiot lights go you can get a handle bar clamp that has them built in. I run mine that way and I have seen others do it to. You can get individual led lights and drill out your dash for a custom setup. Some have mounted them off of the headlight. Some don't even bother with them at all. The possibilities are endless. But like was stated before check to see if the wires and connectors are still there as this will make the job easier. You still might need to adjust the lengths of the wires depending on what type of speedo you go with and were it will be located.
The first thing I would do as HemiOrange has suggested is to see about the wiring harness. Most likely the speedo and idiot lights were just disconnected and the wires and harness are tucked up in the frame probably under the gas tank. If they are there you are more than half way home. You have a few options as far as speedo and idiot lights go. You can go with an analog or digital gauges. They have mounts for the handlebars, the fork tubes hell they even have mirrors with the speedo built into them. As far as idiot lights go you can get a handle bar clamp that has them built in. I run mine that way and I have seen others do it to. You can get individual led lights and drill out your dash for a custom setup. Some have mounted them off of the headlight. Some don't even bother with them at all. The possibilities are endless. But like was stated before check to see if the wires and connectors are still there as this will make the job easier. You still might need to adjust the lengths of the wires depending on what type of speedo you go with and were it will be located.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.