haha
Wiring issue --please some help
Thread Starter
|
Novice
Joined: May 2010
Posts: 24
Likes: 0
Wiring issue --please some help
Hi Guys,
I am trying to install some speakers to my FXDC, I got the sound of crome which have a decent sound, the issue I am facing is that I attached it to the battery so when I turn my bike off, the speakers stay on, so I wanted to see where I went wrong so I can connect it to the accesory plug so when the bike is off the power to the speakers is off too, incase I forget to turn them off I dont run out of battery
I am trying to install some speakers to my FXDC, I got the sound of crome which have a decent sound, the issue I am facing is that I attached it to the battery so when I turn my bike off, the speakers stay on, so I wanted to see where I went wrong so I can connect it to the accesory plug so when the bike is off the power to the speakers is off too, incase I forget to turn them off I dont run out of battery
Elite HDF Member
Joined: Sep 2008
Posts: 4,440
Likes: 148
From: Northwest
On my 08, there is a "customer accessory connector" under the seat. 4-pin.
color code (which most likely is the same as yours)
Pin-1: Orange on Red (+ power - switched)
Pin-2: Red on Yellow ( I think is brake light )
Pin-3: Orange on Red (+ power - switched)
Pin-4: Black (- power - ground)
So I would connect to either pin 1 or pin 3, for switched power. This circuit is a 15a circuit, just so you know.. with a 50w system, you pull maximum about 4 amps.
color code (which most likely is the same as yours)
Pin-1: Orange on Red (+ power - switched)
Pin-2: Red on Yellow ( I think is brake light )
Pin-3: Orange on Red (+ power - switched)
Pin-4: Black (- power - ground)
So I would connect to either pin 1 or pin 3, for switched power. This circuit is a 15a circuit, just so you know.. with a 50w system, you pull maximum about 4 amps.
Last edited by archergodwin; Dec 23, 2010 at 10:35 AM.
On my 08, there is a "customer accessory connector" under the seat. 4-pin.
color code (which most likely is the same as yours)
Pin-1: Orange on Red (+ power - switched)
Pin-2: Red on Yellow ( I think is brake light )
Pin-3: Orange on Red (+ power - switched)
Pin-4: Black (- power - ground)
So I would connect to either pin 1 or pin 3, for switched power. This circuit is a 15a circuit, just so you know.. with a 50w system, you pull maximum about 4 amps.
color code (which most likely is the same as yours)
Pin-1: Orange on Red (+ power - switched)
Pin-2: Red on Yellow ( I think is brake light )
Pin-3: Orange on Red (+ power - switched)
Pin-4: Black (- power - ground)
So I would connect to either pin 1 or pin 3, for switched power. This circuit is a 15a circuit, just so you know.. with a 50w system, you pull maximum about 4 amps.
***Dyna Models Wiring Diagram Links Index***
Go there and click:
2008 all dyna dom. & int. models (except FXDWG, FXDC, FXDF) main harness page 1 of 3
One addition: Use pin 4 for ground.
Check out this thread for more info on the customer accessory connector: Deutsch pin size
Thread Starter
|
Novice
Joined: May 2010
Posts: 24
Likes: 0
Trending Topics
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
Elite HDF Member
Joined: Sep 2008
Posts: 4,440
Likes: 148
From: Northwest
yeah... looking back on that, I probably didn't make that clear enough...( - power ground) would have been better translated into 12v negative ground.... lol
Thread
Thread Starter
Forum
Replies
Last Post
ColoStreetGlide
Audio Systems
9
Mar 2, 2016 06:53 PM
