When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello my rear tailights/brakelights quit working tonight but my lower rear fender light still works..any ideas? Weird because the rear blinkers blink because of alarm so there has to be connection?? Could it be actual on/ off ignition switch on gadtank??any opinions will help me narrow down problem..thanks!!
Have checked voltage at the bulb? Those circuits are probably independent. If there are no blown fuses, then you may have open in the circuit somewhere.
So I took taillight cover off and wiggled bulb and it came on..only problem is brake light wants to stay on and if I mess with brake lever it goes off and on and I hear a click by fusepanel...sometimes it works when I mess with lever sometimes it doesn't?? I'm clueless
So I took taillight cover off and wiggled bulb and it came on..only problem is brake light wants to stay on and if I mess with brake lever it goes off and on and I hear a click by fusepanel...sometimes it works when I mess with lever sometimes it doesn't?? I'm clueless
You have a problem, between the relay Mike mentioned and the light unit. These things are often mechanical, in other words the bulb is defective (replace), a wire is damaged or broken, something simple like that. You can inspect it yourself, to find the precise problem, or visit a dealer/indy. That's about as close as we are going to be able to get, short of visiting you and your bike!
Thx guys the bulb definatly isn't burnt out because it now works,and I took off brake lever to see if it made a difference but it still just stays lit as if brake lever where pressed..funny thing I noticed is if I turn ignition switch a touch towards off position the brake light goes off and taillight only stays lit,but brake light won't come on in this position when either front or rear brake is pressed..ya I guess I'm going to have to take it somewhere..thx guys!
Think I fixed it!! I took of handle again and added 1/8" plastic shim to plunger switch where handle hits when let off..so far so good!! Gotta live these forums saved me at least an hr labor somewhere
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.