Just Dyno'ed
"DYNO" Numbers For SOFTAILS
Tourer
Joined: Aug 2009
Posts: 347
Likes: 1
From: port neches texas
2000 softail deuce
vance and hines straightshots
k&n big filter
max torque 73.67
max power 66.58
Put the big shots staggerd on
max torque 78.47
max power 71.61
Sounds really loud now nice deep rumble
1450cc 88 cubic inch
vance and hines straightshots
k&n big filter
max torque 73.67
max power 66.58
Put the big shots staggerd on
max torque 78.47
max power 71.61
Sounds really loud now nice deep rumble
1450cc 88 cubic inch
Last edited by rodney123456; Feb 14, 2010 at 09:29 AM.
Cruiser
Joined: Dec 2009
Posts: 203
Likes: 0
From: perryville, mo
'09 fatboy dyno
I don't much about any of this, but here is my dyno and tune job i got yesterday, im a bit curious if these are average numbers, and why does the base run lines look smooth but the after tune lines look so jumpy, thanx all !
just wondering if those muffler bearings come in CHROME
Here's mine....for now........
2007 FXST,
103" w/ SE255 cams,
Stock Heads
V&H Big Radius,
SE Heavy Breather,
PCIII,
84 HP, 104 lbs TQ.
.......Getting torn down again this winter to add R&R Stage IV Heads, R&R 615 cams, SE Cam Plate, Rev Perf Roller Rockers, GMR Push Rods.....Should be a nice improvement.
2007 FXST,
103" w/ SE255 cams,
Stock Heads
V&H Big Radius,
SE Heavy Breather,
PCIII,
84 HP, 104 lbs TQ.
.......Getting torn down again this winter to add R&R Stage IV Heads, R&R 615 cams, SE Cam Plate, Rev Perf Roller Rockers, GMR Push Rods.....Should be a nice improvement.
Stage III
Joined: Jul 2006
Posts: 3
Likes: 0
From: Washington
More Numbers
05 Deluxe
95", 9.7:1 compression with Weisco pistons
SE Heads
High flow air cleaner
SE 257 Cams
Power Commander
Vance & Hines Big Shots Staggerd
With a quick tune on the power commander she dyno'd at 92 Hp, don't remember the torque. A little sluggish on the low end, but I knew that when putting in the cams. For most people, I would recommend a smaller set of cams.
95", 9.7:1 compression with Weisco pistons
SE Heads
High flow air cleaner
SE 257 Cams
Power Commander
Vance & Hines Big Shots Staggerd
With a quick tune on the power commander she dyno'd at 92 Hp, don't remember the torque. A little sluggish on the low end, but I knew that when putting in the cams. For most people, I would recommend a smaller set of cams.
Outstanding HDF Member
Joined: Oct 2007
Posts: 2,018
Likes: 6
From: Edmond, Ok
Yep...sure do. Man, that's an old post. I've made so many motor changes since then. I didn't add the R&R heads- went with Baisley instead. And I've swapped cams twice since then. And changed it to a 113".
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Cruiser
Joined: Aug 2009
Posts: 122
Likes: 0
From: USA
2003 flstf
Stock TC88, SE Stage 1, V&H Double Barrel exhaust, Yost Power Tube
This was done after I installed the V&H so I have no idea if the old SE slip ons were any different before the new pipes, the power tube and the dyno.
This was done after I installed the V&H so I have no idea if the old SE slip ons were any different before the new pipes, the power tube and the dyno.
Last edited by centennialfatboy; Feb 24, 2010 at 09:04 AM.
